+- BMW R1200RS / R1250RS Forum Community (https://rswasserboxer.com/R1200RSforum)
+-- Forum: General Forums (https://rswasserboxer.com/R1200RSforum/forum-7.html)
+--- Forum: Parts & Accessories (https://rswasserboxer.com/R1200RSforum/forum-14.html)
+--- Thread: Handguards and risers WITH Wunderlich Handllebars (/thread-1251.html)
Handguards and risers WITH Wunderlich Handllebars - inditx - 04-24-2025
I have a 2016 R1200RS with the Wunderlich handlebar conversion and didn't need any cable extensions.
I would like the bars a bit back and up just a titch yet still.
What risers would work?
Would I then need to add cable extensions?
What handguards could I add?
Thanks in advance
inditx
RE: Handguards and risers WITH Wunderlich Handllebars - Chris216 - 04-26-2025
I did a a set of Rizoma bars on my 2020 R1250RS and ended up going with the Helibar risers which put the bars in a good place for me. I had to use a hose extension on the clutch line, but not on the brakes. I believe it was a Hornig. I also have the Barkbusters hand guards.
Chris
RE: Handguards and risers WITH Wunderlich Handllebars - inditx - 04-26-2025
(04-26-2025, 04:20 AM)Chris216 Wrote: I did a a set of Rizoma bars on my 2020 R1250RS and ended up going with the Helibar risers which put the bars in a good place for me. I had to use a hose extension on the clutch line, but not on the brakes. I believe it was a Hornig. I also have the Barkbusters hand guards.
Chris
Thanks Chris
I wonder how the Rizoma and Wunderlich handlebars differ
Gonna check that out
Do the barkbusters touch the windshield on turning?
inditx
RE: Handguards and risers WITH Wunderlich Handllebars - Chris216 - 04-26-2025
inditx, the Rizoma's are 1 1/8" dia at the clamps, I believe the Wunderlichs are 38 mm (?). Not sure how the bend differs, I had to make some adaptor sleeves to fit the Rizoma's to the BMW clamps. I get about an inch of clearance Barbusters to windscreen.
Chris
RE: Handguards and risers WITH Wunderlich Handllebars - inditx - 04-26-2025
Thanks!