+- BMW R1200RS / R1250RS / R1300RS Forum Community (https://rswasserboxer.com/R1200RSforum)
+-- Forum: General Forums (https://rswasserboxer.com/R1200RSforum/forum-7.html)
+--- Forum: General Discussions (https://rswasserboxer.com/R1200RSforum/forum-8.html)
+--- Thread: Headlight Fairing Removal help (/thread-1435.html)
Headlight Fairing Removal help - CowboyCJ - 03-11-2026
Hi guys,
I've read through old threads about removing the left and right fairing that wraps around the headlights and it was very helpful but I'm still stuck. Am I to assume that in order to remove this that the headlight itself has to come out as it is in the picture from an older thread?
For reference, this is the part that I'm trying to remove:
RE: Headlight Fairing Removal help - Duckbubbles - 03-12-2026
The headlight stays in the upper fairing as shown. It may be possible to remove it first but I don't think it is worth the effort.
Frank
RE: Headlight Fairing Removal help - CowboyCJ - 03-12-2026
Ok thanks I appreciate the clarification. I’ll continue by removing the screws that are obviously holding the headlight in.
RE: Headlight Fairing Removal help - CowboyCJ - 03-16-2026
I'm still seriously stuck on removing the fairing piece. Looking at the pic of the part (above) it shows a couple of fairing screws that are on top of the headlight (shown as #2 - #5 and #3 - #4 - #5). I cannot see how to reach those.
The service manual seems to want me to take off the tank fairings and every other plastic piece up front in order to replace a headlight but from the past threads on here that doesn't seem to be the way.
Is there any advice that you guys can share with me on this?
RE: Headlight Fairing Removal help - Grumpy Goat - 03-16-2026
Might be time to follow the service manual.
Doesn't sound like the people who did it in the past threads you mentioned are still around or if they did, like me they don't remember the specifics.
I know I did have the left side off for my 2016 RS, which might be different from your 2023 R1250RS (although I don't see why it should). I don't recall it being that difficult. I removed mine to install the horn for my Denali SoundBomb between the headlamp assemblies. Here is the video on my YouTube channel. In that video you will see what I removed.