Should You Double Check the Balance After Dealer Tire Installation?

[Grumpy Goat]

If you decide to use the regular weights on the inside of your R1200RS rims to balance the rim use some super glue vs the current stick on tape. On my GSA ribs I had Woody weld the metal to the inside of the rim. On my K1200RS and K75S wheels I used and permanently left regular stick on weights. Then if out of balance slightly just add a weight or two some place else on the rim to finish the balancing.

I was thinking two-part epoxy but thanks for that suggestion too. Definitely would not use the double-sided tape since subsequent tire removal / installation could see a bead knocking these weights off.