Posts: 2,995
Threads: 196
Joined: Feb 2014
Reputation:
332
Location: Houston, Texas, USA
06-10-2020, 03:55 PM
(This post was last modified: 06-10-2020, 03:56 PM by Grumpy Goat.)
Does anyone have any experience with genuine BMW stickers, i.e. the ones for the model name / number on the side panels that you buy from the BMW parts fiche?
Are they simple peel-and-stick or are they the kind that you wet the panel and apply the sticker (like a transfer) wet, slide it into place and then squeegee out the bubbles?
Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
Posts: 2,102
Threads: 60
Joined: Jun 2018
Reputation:
240
Location: Iowa, US
06-11-2020, 07:26 AM
(This post was last modified: 06-11-2020, 07:35 AM by Lee.)
I bought one for my K1200RS from BMW but never used it.
From what I remember it was a reverse setup like this video shows.
https://youtu.be/UAzSBcDAZY4
On my sticker there was a paper backing and also a paper over the sticker.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 2,995
Threads: 196
Joined: Feb 2014
Reputation:
332
Location: Houston, Texas, USA
Thanks Lee. I think that the sticker I ordered is similar to the one you have and also in the video. Speaking of the video ... thank goodness for heat guns, eh?
Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
Posts: 2,995
Threads: 196
Joined: Feb 2014
Reputation:
332
Location: Houston, Texas, USA
(06-11-2020, 03:15 PM)Duccrazydave Wrote: That was an oddly satisfying video to watch 
Hah! I said exactly the same thing to my wife!
I watched a couple more that popped up on my YouTube Recommendations and had the same feeling both times.
Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
Posts: 127
Threads: 2
Joined: Jun 2018
Reputation:
27
I used to have to apply those double sided stickers to aircraft. I have a plastic scraper to get the bubbles out (furnished with many of the decals). Many recommended to use a mild soapy solution to apply. Wet the surface with the solution, peel the backing off and you can slide the sticker around to the position you want. Then use the scraper to squeegee the air out before carefully pulling the top layer off. In 24 hours (recommended) it is good for a couple hundred MPH.
Frank
'23 R1250RS, 9000 mi. 1 yr., '03 R1100S BCR #6/200, '85 K100/1100RS- 38 yrs. 331,000 mi., '17R1200RS- 51,054 mi. (gone), '16 R1200RS- 28,322 mi. (gone), '11 R1200RT-30,000 mi. (gone), '05 R1200ST-58,000 mi. (gone), '96 Ducati 900SS/SP-89,000 mi. (gone), 560K+ BMW miles
Posts: 2,102
Threads: 60
Joined: Jun 2018
Reputation:
240
Location: Iowa, US
(06-12-2020, 06:51 AM)Duckbubbles Wrote: I used to have to apply those double sided stickers to aircraft. I have a plastic scraper to get the bubbles out (furnished with many of the decals). Many recommended to use a mild soapy solution to apply. Wet the surface with the solution, peel the backing off and you can slide the sticker around to the position you want. Then use the scraper to squeegee the air out before carefully pulling the top layer off. In 24 hours (recommended) it is good for a couple hundred MPH.
Frank
Seems like a lot of stickers can use soapy water if you use a plastic squeegee tool to srap put the water.
I've done this with 3M film and MotoReflective films.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
