Posts: 33
Threads: 11
Joined: Sep 2023
Reputation:
8
Location: Canada
03-31-2024, 07:45 PM
(This post was last modified: 03-31-2024, 07:49 PM by NormR.)
Hi there,
I somehow managed to scratch the glass on my right side mirror. I probably picked something up with the wash glove and put a two inch long scratches across the glass. I looked to see if there is an OEM replacement with no success. Luckily there are no other scratches anywhere else so I am super relieved about that.
If anybody is going to ask, I rinse the bike prior to soaping, use 3 different wash gloves, 2 buckets, change the water at least once during the wash and have a pickup plate in the bottom of my wash bucket to prevent dirt getting on my gloves. Has anybody come across a way to replace the glass on a mirror? Is there a way to remove the scratches with 2000-3000 wet sandpaper (not sure)? Every time I check my mirror while riding I ask myself how I F'd -up
cheers
Posts: 369
Threads: 17
Joined: Sep 2021
Reputation:
64
Location: Albany, New York
If you can source an "Old School" glass shop/glazier they can probably best advise you after seeing the damage. Good luck!
Happiness comes not from what you have, but from enjoying all that you do have no matter how much or little that may be.
Be stubborn with your dream but flexible with your path
Posts: 2,996
Threads: 196
Joined: Feb 2014
Reputation:
334
Location: Houston, Texas, USA
Interesting problem ... and sorry hear of this scratch.
(03-31-2024, 07:45 PM)NormR Wrote: ...
If anybody is going to ask, I rinse the bike prior to soaping, use 3 different wash gloves, 2 buckets, change the water at least once during the wash and have a pickup plate in the bottom of my wash bucket to prevent dirt getting on my gloves. Has anybody come across a way to replace the glass on a mirror?
...
While I am aware of the 2-bucket method, and with all the excellent steps you take for proper washing, I don't do any of that when I hand wash the bike. I use the same sponge/mitt that is kept clean, one bucket, one bucketful of wash water and no pickup plate. I also have no scratches from the washing operation and certainly none that would scratch glass.
That said I can't see how a bit of grit on the wash mitt would impart such scratches on the glass. Glass is very hard, and if it did not scratch the soft plastic parts of the bike then it was probably not a gritty wash mitt that scratched your mirror.
Any chance of a proper close-up photo to show this scratch on the mirror?
(03-31-2024, 07:45 PM)NormR Wrote: Is there a way to remove the scratches with 2000-3000 wet sandpaper (not sure)?
Doubt that would work since the grit in the sandpaper is probably similar hardness to the glass and with that size of grit you'd probably not make any headway. My suggestion is (if the scratch is worth US$215.94 / MAX BMW parts fiche) to replace the mirror, after giving the sandpaper a try (you never know).
Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
Posts: 2,996
Threads: 196
Joined: Feb 2014
Reputation:
334
Location: Houston, Texas, USA
(04-01-2024, 05:29 AM)Motorhead1977 Wrote: If you can source an "Old School" glass shop/glazier they can probably best advise you after seeing the damage. Good luck!
Good tip.
Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
Posts: 2,103
Threads: 60
Joined: Jun 2018
Reputation:
240
Location: Iowa, US
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 2,103
Threads: 60
Joined: Jun 2018
Reputation:
240
Location: Iowa, US
04-01-2024, 08:57 AM
(This post was last modified: 04-01-2024, 08:58 AM by Lee.)
Here's another used one for $42
I think the raw edge is part of the mount which can be removed??
https://www.ebay.com/itm/145655385326?it...R_LRhqHTYw
Here's pictures of my spare mirror.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 45
Threads: 2
Joined: Nov 2023
Reputation:
4
Location: United States
I don't think that I would use sandpaper as it might leave additional scratches, what about using a mirror polish paste or maybe something like semi-chrome polish? Have you thought about calling a business that sells mirrors for houses to ask?
Posts: 242
Threads: 22
Joined: Nov 2019
Reputation:
54
Location: TX
I agree with the glass shop idea. I'd look for a mom and pop as opposed to Binswanger, etc. Material cost should be low, as they can probably use a drop from another job. It's not a straight cut, but any glazier should be able to do this.
*worked in a glass shop a million years ago.
2022 BMW R1250 GSA
2024 Yamaha Xmax
1985 Honda Nighthawk S
1985 Yamaha RZ350
Posts: 35
Threads: 1
Joined: Sep 2023
Reputation:
8
Location: S/E Texas
I have found many new mirrors are not glass but a plastic of some type
Posts: 33
Threads: 11
Joined: Sep 2023
Reputation:
8
Location: Canada
(04-02-2024, 07:07 PM)c10 Wrote: I have found many new mirrors are not glass but a plastic of some type
I've heard that before but have never been able to confirm it.......
Posts: 6
Threads: 2
Joined: Aug 2024
Reputation:
0
Location: NZ
08-07-2024, 01:59 AM
(This post was last modified: 08-07-2024, 04:51 AM by Grumpy Goat.
Edit Reason: Incorrect quoting
)
(03-31-2024, 07:45 PM)NormR Wrote: Hi there,
I somehow managed to scratch the glass on my right side mirror. I probably picked something up with the wash glove and put a two inch long scratches across the glass. I looked to see if there is an OEM replacement with no success. Luckily there are no other scratches anywhere else so I am super relieved about that. ...
Just take the mirror to a glass / mirror shop and get them to cut you a new one - i got one for my R1100s for about $15 NZ,,,,easy
Posts: 2,103
Threads: 60
Joined: Jun 2018
Reputation:
240
Location: Iowa, US
(08-07-2024, 01:59 AM)grantm Wrote: (03-31-2024, 07:45 PM)NormR Wrote: Hi there,
I somehow managed to scratch the glass on my right side mirror. I probably picked something up with the wash glove and put a two inch long scratches across the glass. I looked to see if there is an OEM replacement with no success. Luckily there are no other scratches anywhere else so I am super relieved about that. ...
Just take the mirror to a glass / mirror shop and get them to cut you a new one - i got one for my R1100s for about $15 NZ,,,,easy
How is the mirror held in the housing?
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 33
Threads: 11
Joined: Sep 2023
Reputation:
8
Location: Canada
08-08-2024, 08:52 AM
(This post was last modified: 08-08-2024, 01:50 PM by Grumpy Goat.
Edit Reason: Overquoting
)
(08-07-2024, 07:47 AM)Lee Wrote: How is the mirror held in the housing?
I'm not sure but its meant to be permanent so I guess its some type of adhesive. So far, I've been living with the scratch and will just replace the mirror down the road
|