Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
So seriously ... would you buy one of these Kawasakis?
#1
Interesting story ... Good too ...

Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
Reply
#2
The title makes it sound like you would not buy one.
Am I reading that right?

I wonder what percentage of the employees work the short shift?
Lee
Iowa, USA
2022 R1250RS White Sport

Past BMWs: 2016 R1200RS x 2,  2011 K1300S x 2,  2003 K1200RS x 2,  1991 K75S x 2,  1987 K75T x 2, 1984 R100RT
Reply
#3
(05-11-2022, 12:00 PM)Lee Wrote: The title makes it sound like you would not buy one.
Am I reading that right?

I don't understand the question either.
Reply
#4
Do you want a Deli worker putting your bike together?
I assume these workers are not getting benefits with a sort shift.
R&D department
Reply
#5
(05-11-2022, 01:15 PM)maxredline Wrote: Do you want a Deli worker putting your bike together?
I assume these workers are not getting benefits with a sort shift.

It used to be places would only pay partial benefits for those kind of hours.
Hard to say now. Places are desperate to get people to work.

I wonder if the motorcycle plants are trying the same short shift? The Lincoln plant builds ATV, UTV and watercraft.
We have a Kawasaki plant 70 miles south of us that builds engines for yard and garden equipment.
I don't know where the motorcycle plants are in the US.
Lee
Iowa, USA
2022 R1250RS White Sport

Past BMWs: 2016 R1200RS x 2,  2011 K1300S x 2,  2003 K1200RS x 2,  1991 K75S x 2,  1987 K75T x 2, 1984 R100RT
Reply
#6
(05-11-2022, 01:15 PM)maxredline Wrote: Do you want a Deli worker putting your bike together?
I assume these workers are not getting benefits with a sort shift.

Are you saying they aren't being trained? If they are building motors on a Kawi assembly line they aren't deli workers, they are engine builders.  It doesn't require an engineering degree to assemble a motor on a well-designed factory assembly line.  

Who is more likely to make a mistake, the assembler working five hour shift or the assembler working the 12 hour shift?  

Their benefit is a 9 to 2 shift five days a week.  Good for them.
Reply
#7
(05-11-2022, 03:08 PM)TriangleRider Wrote: Are you saying they aren't being trained? If they are building motors on a Kawi assembly line they aren't deli workers, they are engine builders.  It doesn't require an engineering degree to assemble a motor on a well-designed factory assembly line.  

Who is more likely to make a mistake, the assembler working five hour shift or the assembler working the 12 hour shift?  

Their benefit is a 9 to 2 shift five days a week.  Good for them.

I agree.
Lee
Iowa, USA
2022 R1250RS White Sport

Past BMWs: 2016 R1200RS x 2,  2011 K1300S x 2,  2003 K1200RS x 2,  1991 K75S x 2,  1987 K75T x 2, 1984 R100RT
Reply
#8
Great discussion so far ... one that I hoped the subject line would provoke. Big Grin

I personally think it's a fine idea and if they are trained properly, I see no difference between these workers and the "regular" ones. However, there are some people maybe in this Forum Community (maybe even in this thread) who might think twice before buying, say an RS assembled in Vietnam vs one assembled in Berlin. Forget Vietnam ... China ... ?  Smile

Some of us have pre-conceived notions of quality based on who is assembling / where the factory is located ...
Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
Reply
#9
(05-11-2022, 04:14 PM)Grumpy Goat Wrote: However, there are some people maybe in this Forum Community (maybe even in this thread) who might think twice before buying, say and RS assembled in Vietnam vs one assembled in Berlin. Forget Vietnam ... China ... ?  Smile

Some of us have pre-conceived notions of quality based on who is assembling / where the factory is located ...

You lost me.
What does the video have to do with any of that?
Lee
Iowa, USA
2022 R1250RS White Sport

Past BMWs: 2016 R1200RS x 2,  2011 K1300S x 2,  2003 K1200RS x 2,  1991 K75S x 2,  1987 K75T x 2, 1984 R100RT
Reply
#10
I wouldn't have an issue buying a product made on that line/shift. It sounds like those workers are very motivated and satisfied. Should make for exceptional quality output I would think. Thanks for posing the question GG.
Happiness comes not from what you have, but from enjoying all that you do have no matter how much or little that may be.
Be stubborn with your dream but flexible with your path
Reply
#11
The debate is interesting, but as I recall, at this point it is moot. The engines built in Lincoln don't go into motorcycles, and I don't need a 4-wheel ATV or mule.

I know part of the folklore of US-built Kawi's was that the original plant was an old slaughterhouse in Chicago.

My era - the '75 KZ400 was a Lincoln NE product and for one year - the KZ900. Later ZX-11 and others.

Lots of cruisers and - more folklore - a few times, US-built Kawasakis outsold US-built Harleys.

My understanding is that Kawasaki stopped building bikes in the US in 2005.
"A good man always knows his limitations...."
Reply
#12
The only problem with the plan is health insurance. All the other benefits can be pro-rated to the hours worked. But, US Health Insurance is priced on a per person basis at $800~1100 / month (total, employee and employer cost).
I knocked, but the door was open.......
Central PA: 2016 Lupin RS - Keys and no TPMS
Reply
#13
I think it was a smart move by the plant to try the 5 hour shift. Companies need to be creative now to get people to apply and stay.
The ones with kids in school probably want to stay with that shift but others may move up to full time as they get experience.

I didn't know motorcycle or auto related plants did not use part time workers so it would have no impact on my decision to buy from that company.
When I purchased my John Deere mower I did not check to see if there were part time employees at the Maryville plant.
Lee
Iowa, USA
2022 R1250RS White Sport

Past BMWs: 2016 R1200RS x 2,  2011 K1300S x 2,  2003 K1200RS x 2,  1991 K75S x 2,  1987 K75T x 2, 1984 R100RT
Reply
#14
(05-11-2022, 05:43 PM)Motorhead1977 Wrote: I wouldn't have an issue buying a product made on that line/shift. It sounds like those workers are very motivated and satisfied. Should make for exceptional quality output I would think. Thanks for posing the question GG.

That was my take as well. 

As a purchaser of the products, I'd only be concerned that their operating processes ensured that the people were properly trained and that their assembly tasks were broken down in such a way that it supported an initially less skilled workforce could do it while maintaining the same level of quality assurance. 

If that is the case then the fact that they are well motivated (due to the good pay), probably less tired (due to the shorter hours), and (probably most importantly to those people) more at ease (due to the timing of the shift) means that the output would probably be even better than a conventional shift operation.

I applaud Kawasaki for taking that initiative and giving it a go.
Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
Reply
#15
Here's a 2014 video of the plant.
https://youtu.be/7Oe7besB6XM


This 2014 video shows the Rail Cars.

https://youtu.be/gqvEyRQMUVs
Lee
Iowa, USA
2022 R1250RS White Sport

Past BMWs: 2016 R1200RS x 2,  2011 K1300S x 2,  2003 K1200RS x 2,  1991 K75S x 2,  1987 K75T x 2, 1984 R100RT
Reply
#16
(05-12-2022, 06:05 AM)Lee Wrote: I think it was a smart move by the plant to try the 5 hour shift. Companies need to be creation now to get people to apply and stay.
The ones with kids in school probably want to stay with that shift but others may move up to full time as they get experience.
If companies are doing this for the right reasons and training is not just in name, good on them.
In my experience I have never seen this, call me jaded but that is my truth.
R&D department
Reply
#17
I think it's a good idea obviously these people are trained in the assembly of whatever parts they are making and I assume there are inspectors there who would check everything before the products leave the plant. If the company are prepared to have shift patterns that suit people then well done them. Truth is it's a global economy now and no bike / car is 100% American / British / German etc. Triumph who make a big issue of being a British bike manufacturer and  cover their bikes with Union Flag graphics are mostly built in Thailand although they are bringing more production jobs back to the UK.
Reply


Forum Jump:


Users browsing this thread: 7 Guest(s)