01-04-2024, 08:58 PM
I'm in the process of mounting the same Denali horn (along with Denali D3 lights). This placement seems easier to access than replacing the OEM horn where it is. I will probably use a bracket and bolt the compressor to the crash bar as Grumpy did, but use this placement for the acoustic part.
Did you do anything with the OEM horn? Can it be left in place and work with the Denali (not that you could hear it, I'm sure)?
My RS is a 2017 I bought in April with 600 miles, now has 10K, and I love it. PO had installed crash bars, but I don't find a brand on them. They provide a good place to mount the lights so long as I plan for removing coil covers. My first choice for light placement would have required moving them for spark plug replacement.
Since I have removed the side panels, I'm planning to go ahead and replace the air filter at 10K. Anything else I should do while it's opened up?
Did you do anything with the OEM horn? Can it be left in place and work with the Denali (not that you could hear it, I'm sure)?
My RS is a 2017 I bought in April with 600 miles, now has 10K, and I love it. PO had installed crash bars, but I don't find a brand on them. They provide a good place to mount the lights so long as I plan for removing coil covers. My first choice for light placement would have required moving them for spark plug replacement.
Since I have removed the side panels, I'm planning to go ahead and replace the air filter at 10K. Anything else I should do while it's opened up?