01-04-2024, 09:10 PM
Hi oldjoe -- I left the OEM horn in place. When I hit the horn button, the CANBus causes the OEM horn to sound, and the Hex EZCAN sees the CANBus signal and sounds the SoundBomb Split at the same time.
If you envision wanting to add anything else electrical up front in the future (dash cam, phone power, extra DIN socket, etc.), now would be a good time to run one or two spare pairs of wires along the frame between the steering head region and the tail region. Might save you some bodywork removal in the future. You may not end up needing the full head-to-tail length of the wires, but better to be able to cut off excess when doing an installation, than to be extending too-short wires.
If you envision wanting to add anything else electrical up front in the future (dash cam, phone power, extra DIN socket, etc.), now would be a good time to run one or two spare pairs of wires along the frame between the steering head region and the tail region. Might save you some bodywork removal in the future. You may not end up needing the full head-to-tail length of the wires, but better to be able to cut off excess when doing an installation, than to be extending too-short wires.