MAM bars with Denali D2s

[Grumpy Goat]

...After removing the tank side panels, I started routing the wiring. Using both individual extension leads (instead of one lead paired off) allows for left/right off function while using turn signals, instead of both lights turning off.
...

Dave - I wonder if you have a different / updated wiring harness with yours, because I have both Denalis come off when either signal is activated. While it sounds that you only have the same-side Denali switch off when the signal is activated. Would be nice to have one still on.

When I installed mine, they were just developing the firmware to switch off the Denalis, and so I was sent a beta copy of the firmware which worked as described (both off when signalling). IIRC, they said that they were unable (up to that point) to provide the one-side off feature due to the wiring harness they had (at that time?). That is why I am wondering if your harness is different.

Which individual extension leads are you referring to? Photo?