04-28-2020, 09:11 AM
I haven't watched the NoMar videos in a long time. If they're like the old videos, and the demo at the motorcycle shows, the tire they use has been mounted and dismounted so often it should jump on the rim by itself. The technique is the same with a new tire, the effort required is not.
I use Murphy's Lube. I think I bought mine at O reilly's or Autozone. 8# tub will outlast me. Slather it all around the drop center, too much is better than not enough. Mix some w/water in a spray bottle as well.
http://www.bowessealfast.com/p-804-murph...gK3dPD_BwE
If you're struggling too much, you're doing it wrong. You can bend a rim with a spoon. Be prepared to walk away and try again. Again, DAMHIK.
I use Murphy's Lube. I think I bought mine at O reilly's or Autozone. 8# tub will outlast me. Slather it all around the drop center, too much is better than not enough. Mix some w/water in a spray bottle as well.
http://www.bowessealfast.com/p-804-murph...gK3dPD_BwE
If you're struggling too much, you're doing it wrong. You can bend a rim with a spoon. Be prepared to walk away and try again. Again, DAMHIK.
2022 BMW R1250 GSA
2024 Yamaha Xmax
1985 Honda Nighthawk S
1985 Yamaha RZ350
2024 Yamaha Xmax
1985 Honda Nighthawk S
1985 Yamaha RZ350