01-16-2022, 12:33 PM
(This post was last modified: 01-17-2022, 11:29 AM by Grumpy Goat.)
Next reassemble everything, and check that every thing is in the right place, correct as necessary. Handle bar clamp torque 19 NM, Levers 8 NM, locating screws snug.
I'm running the Bark Buster Storms as well, and with a minor tweak at the mirrors and a small trim of the extension fairings I added for tank clearance everything works fine.
With the Rizoma MA009 bend the bars are a bout halfway between stock and with the Heibar risers height wise. They sit back towards the rider an inch or two and the angle is better for my wrists.
I'd love to get out for a test ride, but as this is the current view outside I may have to wait awhile...
Chris
I'm running the Bark Buster Storms as well, and with a minor tweak at the mirrors and a small trim of the extension fairings I added for tank clearance everything works fine.
With the Rizoma MA009 bend the bars are a bout halfway between stock and with the Heibar risers height wise. They sit back towards the rider an inch or two and the angle is better for my wrists.
I'd love to get out for a test ride, but as this is the current view outside I may have to wait awhile...
Chris