R1250RS Newbie

[ESquared]

BTW, raised the gear-shifter a bit and it's now playing nicely with the SIDI boots (thanks again, GG!). When it comes to this adjustment, if you have QuickShift, ignore your owner's manual and use this:

https://www.youtube.com/watch?v=rVCrzqzGAwE&t=3s

<2 minute job, including the time it will take you to find a 10mm open-ended wrench.

Be aware that one of the nuts is right hand thread and the other is left hand thread. Don't go too crazy trying to break the nuts loose. A close inspection of the threads will tell you which way the tighten/loosen. I really appreciate the opposite threads as you don't have to remove one end completely to adjust the linkage.

Frank

Exactly right on the threading. I believe the YT vid notes that.