(05-19-2022, 02:28 PM)ESquared Wrote: So, my questions are: 1) Is it normal to NOT get a reading through the TFT at all while sitting still (engine off); and 2) Should I just not sweat it if I'm getting good cross-checks with other devices?
To see the TPM reading you need to go faster than 20 mph. I don't remember the required distance but ours usually comes on in 200 feet or so.
It should not take 1/2 mile if you're going over 20.
As for accuracy it may be your gauges. On our R1200 and R1250 my gauge usually reads within 1 PSI of the dash reading when I first take off.
I use a chart to set the pressure. The TPM readout is compensated to 68F.
If it's 90F in your garage when you check with a gauge you need to read 38 and 44 on your gauge to get the recommended pressure.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT