Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hold on sales of 2023 RS bikes?
#11
(03-14-2023, 09:35 AM)windyrun Wrote: Regarding my experience with the tubular bars ... They were about the same height as the std RS bars while sitting on either one in showroom. The thing I noticed while riding was more of an elbows out (just a very small amount mind you) on the bike with the tubular bars but same reach. If you look at the configurator and click on/off on the tubular bars option you can see they both have similar feel just tubular bar ends a bit up and forward a tad which is my experience riding (done before looking at the configurator).  Hope this makes sense.  Link below:

https://configurator.bmwmotorcycles.com/.../EQUIPMENT

Thanks. In the past I found it difficult to see the reach and height difference with the configurator view.
It's too bad BMW does not give measurements of both bars.
It would  be nice if they also compared to the standard R bars and the lower R Sport bars.
I don't think the R Sport bars are still available as a option on the 2023 but a person can order them from the parts department.
Lee
Iowa, USA
2022 R1250RS White Sport

Past BMWs: 2016 R1200RS x 2,  2011 K1300S x 2,  2003 K1200RS x 2,  1991 K75S x 2,  1987 K75T x 2, 1984 R100RT
Reply


Messages In This Thread
Hold on sales of 2023 RS bikes? - by windyrun - 03-13-2023, 08:37 AM
RE: Hold on sales of 2023 RS bikes? - by windyrun - 03-13-2023, 04:01 PM
RE: Hold on sales of 2023 RS bikes? - by windyrun - 03-13-2023, 06:43 PM
RE: Hold on sales of 2023 RS bikes? - by Lee - 03-14-2023, 08:00 AM
RE: Hold on sales of 2023 RS bikes? - by Lee - 03-14-2023, 08:29 AM
RE: Hold on sales of 2023 RS bikes? - by windyrun - 03-14-2023, 09:35 AM
RE: Hold on sales of 2023 RS bikes? - by Lee - 03-14-2023, 10:10 AM
RE: Hold on sales of 2023 RS bikes? - by windyrun - 03-20-2023, 08:53 AM
RE: Hold on sales of 2023 RS bikes? - by windyrun - 03-20-2023, 01:44 PM
RE: Hold on sales of 2023 RS bikes? - by Lee - 03-20-2023, 04:28 PM

Forum Jump:


Users browsing this thread: 6 Guest(s)