Posts: 2,043
Threads: 59
Joined: Jun 2018
Reputation:
233
Location: Iowa, US
(10-05-2022, 08:19 AM)runnerhiker Wrote: When the bike is on the center stand, there is so much weight on the front tire that I can't manually rotate the tire to make the air valve accessible. Not a big deal, just an observation. The 6 cyl engine puts a lot of weight forward and the center stand is located fairly far backwards.
That's a K Bike thing. Our three and four cylinder K bikes were that way.
The pivot point of the center stand on a R Bike must be closer to the center of gravity.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 2,043
Threads: 59
Joined: Jun 2018
Reputation:
233
Location: Iowa, US
10-05-2022, 12:10 PM
(This post was last modified: 10-05-2022, 12:13 PM by Lee.)
(10-05-2022, 08:19 AM)runnerhiker Wrote: I cannot use my SW-Motech tank bags, there is interference with the handlebar at lock to lock. The gas cap if fairly far forward towards the triple clamp, and the bars come back a lot towards the rider. The SW-Motech website shows zero tank bags available for the GT. Pictures of the BMW tank bag show it is located close to the rider and far back from the gas cap. Oh well.
It's even worse on the GTL.
I think RKA has a strap tank bag for the K1600. I'll take a look.
Here you go.
https://rka-luggage.com/product/10-0-lit...int/#style
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 2,043
Threads: 59
Joined: Jun 2018
Reputation:
233
Location: Iowa, US
I checked with a friend who had a K1600GT for a short time and he said he used the BMW bag. It's 10 liters.
Which SW-Motech bag do you have?
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 319
Threads: 15
Joined: Jun 2018
Reputation:
92
10-06-2022, 10:48 PM
(This post was last modified: 10-06-2022, 10:49 PM by runnerhiker.)
(10-05-2022, 04:57 PM)Lee Wrote: I checked with a friend who had a K1600GT for a short time and he said he used the BMW bag. It's 10 liters.
Which SW-Motech bag do you have?
I have 3 motorcycles, I have 3 SW-Motech - the Engage, the Daypack, and the Micro. It was nice to move them around, pick a size, etc, and have all of them not touching the tank paint. Not anymore. I ordered a BMW tank bag today, the 10 liter size, I plan to put something between the paint and the bag, at least a soft plastic laminate. Even the Micro interfered with the handlebar at full lock.
2020 R1250 RS
2022 K1600 GT
2022 Kawasaki H2SXSE
Niwot CO USA
Posts: 2,043
Threads: 59
Joined: Jun 2018
Reputation:
233
Location: Iowa, US
10-07-2022, 06:45 AM
(This post was last modified: 10-07-2022, 06:57 AM by Lee.)
(10-06-2022, 10:48 PM)runnerhiker Wrote: Even the Micro interfered with the handlebar at full lock.
I could not remember if you had a Micro and was wondering if it would work.
I had the 10 liter BMW K1300S tank bag on my K1300S and used tool tray liner under the tank bag.
I cut slits for the straps to go through and this prevented the liner from blowing away at gas stops.
This setup kept the top of the tank looking good.
When you get the BMW tank bag place it on the tank ring. It may give you a little gap and still be able to strap it in place.
Worth a try.
I never had any problems with the straps marking the tank. Each morning on trips I would clean the top of the tank to make sure there was no grit that might scratch the paint.
Clear 3M film is also a option for top of the tank.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 2,043
Threads: 59
Joined: Jun 2018
Reputation:
233
Location: Iowa, US
Ron, this picture shows the tool tray liner mat sticking out at the back of the tank bag.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 2,914
Threads: 195
Joined: Feb 2014
Reputation:
322
Location: Houston, Texas, USA
(10-07-2022, 06:45 AM)Lee Wrote: Clear 3M film is also a option for top of the tank.
That is what I would use. And keep an eye on the firm to check its wear. I had this on the S1000R when I had the Wunderlich tank bag and it worked well. Switched to an SW Motech bag afterwards.
Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
Posts: 319
Threads: 15
Joined: Jun 2018
Reputation:
92
Thanks for the info on tank bags and tank protection. Tool tray liner and clear 3M, one or both. And wiping off the tank, I get a lot of dust into my garage, the bikes almost always have a thin layer of dust on them, ugh.
2020 R1250 RS
2022 K1600 GT
2022 Kawasaki H2SXSE
Niwot CO USA
Posts: 2,914
Threads: 195
Joined: Feb 2014
Reputation:
322
Location: Houston, Texas, USA
(10-07-2022, 11:38 PM)runnerhiker Wrote: Thanks for the info on tank bags and tank protection. Tool tray liner and clear 3M, one or both. And wiping off the tank, I get a lot of dust into my garage, the bikes almost always have a thin layer of dust on them, ugh.
A fast ride will blow off the dust, right Bruce? California Duster (or similar) is your friend.
Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
|
