I now have both parking light bulbs out on the bike. There is an indicator on the dash and GPS indicates only 1 is out. I'm assuming both parking bulbs are lite when the bike is running. I picked up the 2 bulbs needed to replace the burnt out ones. I do not know exactly how to remove the receptacle holder for the bulbs. Has anyone done this or know a specific procedure how to change the bulbs?

(08-09-2018, 06:17 AM)darrell Wrote: I now have both parking light bulbs out on the bike. There is an indicator on the dash and GPS indicates only 1 is out. I'm assuming both parking bulbs are lite when the bike is running. I picked up the 2 bulbs needed to replace the burnt out ones. I do not know exactly how to remove the receptacle holder for the bulbs. Has anyone done this or know a specific procedure how to change the bulbs?

Interesting feedback from the GPS. I believe that both are on when the bike is running.

I will check my Haynes Manual when I get home to see if it tells how to replace the parking light bulb. It would be good to know.

Here you go, Darrell.

  Changing the Sidelight Bulbs.pdf (Size: 2.26 MB / Downloads: 33)

Thanks Wayne, a big help. I was able to do both sides changing the parking bulbs without removing any parts other than the round cover for the lights. Once I knew the process it was pretty easy. The parking bulb on the high beam side burned out at about 50,000 miles and the low beam side burned out at 60,000 miles.

(08-09-2018, 07:05 PM)darrell Wrote: Thanks Wayne, a big help. I was able to do both sides changing the parking bulbs without removing any parts other than the round cover for the lights. Once I knew the process it was pretty easy. The parking bulb on the high beam side burned out at about 50,000 miles and the low beam side burned out at 60,000 miles.

Great, Darrell. Glad you figured it out. That is great mileage out of those bulbs.