Posts: 2,120
Threads: 60
Joined: Jun 2018
Reputation:
242
Location: Iowa, US
10-22-2020, 03:18 PM
(This post was last modified: 10-22-2020, 03:21 PM by Lee.)
I changed the air filter again on our bikes today and took a few pictures so you can see what's under the tupperware.
These are the only panels that need to be removed.
The BMW shop manual shows removing the winglets first but I did not bother this time.
Here's what it looks like naked.
Fasteners are missing from the gas cap because we use tank bags secured by a tank ring.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 2,120
Threads: 60
Joined: Jun 2018
Reputation:
242
Location: Iowa, US
10-22-2020, 03:20 PM
(This post was last modified: 10-22-2020, 03:24 PM by Lee.)
I like to keep the fasteners organized as I remove them.
If I miss a fastener when reinstalling, I know where it goes.
This time when done with the first bike I saw I had 4 fasteners that hold the gas tank assembly to the tank in the container. Good thing it's easy to remove the tupperware
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 271
Threads: 9
Joined: Jun 2019
Reputation:
83
Location: Minnesota USA
Just changed the air filter in my '19 GSA today. Four screws to get the tank ring off, seven screws to get the single piece of plastic tank cover off. Same four screws to access airbox, same filter. Replacement time was about 15 minutes.
I ride '19 R1250GSA, '23 KTM Duke 890 R, '23 Yamaha Xmax 300
My wife rides '20 R1250GS, '22 KTM Duke 890 GP, '19 Yamaha Xmax 300
Formerly proud Granite Gray '16 R1200RS x2 owners
Posts: 2,120
Threads: 60
Joined: Jun 2018
Reputation:
242
Location: Iowa, US
(10-22-2020, 03:39 PM)MrVvrroomm Wrote: Just changed the air filter in my '19 GSA today. Four screws to get the tank ring off, seven screws to get the single piece of plastic tank cover off. Same four screws to access airbox, same filter. Replacement time was about 15 minutes.
Yep the GS is easier than the RS. Does the GS and GSA have the same setup?
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 271
Threads: 9
Joined: Jun 2019
Reputation:
83
Location: Minnesota USA
(10-22-2020, 05:01 PM)Lee Wrote: Yep the GS is easier than the RS. Does the GS and GSA have the same setup? It's similar enough to call it the same.
I ride '19 R1250GSA, '23 KTM Duke 890 R, '23 Yamaha Xmax 300
My wife rides '20 R1250GS, '22 KTM Duke 890 GP, '19 Yamaha Xmax 300
Formerly proud Granite Gray '16 R1200RS x2 owners
Posts: 494
Threads: 42
Joined: Jun 2018
Reputation:
59
Location: NC, USA
From a certain angle, that tank filler mount looks like a face hugger from "Alien"
Posts: 176
Threads: 23
Joined: Mar 2020
Reputation:
25
Location: Missouri
Having just watched alien covenat yesterday I'd have to agree. Hopefully no alien creatures will tear their way out of the crankcase.
Chris
Posts: 3,031
Threads: 199
Joined: Feb 2014
Reputation:
341
Location: Houston, Texas, USA
(10-22-2020, 03:39 PM)MrVvrroomm Wrote: Just changed the air filter in my '19 GSA today. Four screws to get the tank ring off, seven screws to get the single piece of plastic tank cover off. Same four screws to access airbox, same filter. Replacement time was about 15 minutes.
I like that. No need to remove any side fairings.
Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
Posts: 26
Threads: 4
Joined: Apr 2022
Reputation:
6
Location: UK - Bonnie Scotland
I think it was around 26 screws recently.
No matter what the old filter looks like, your not going to leave it in after digging for so long.
Posts: 320
Threads: 41
Joined: Jan 2022
Reputation:
38
Location: Vancouver, Canada
Nice write up thanks!
R&D department
Posts: 273
Threads: 16
Joined: Sep 2021
Reputation:
50
Location: Milwaukee, USA
I've seen paper diagrams with fasteners gently laid in place, I've seen cardboard diagrams with fasteners pushed through the cardboard where they belong on the part, and now parts in little plastic Tupperware containers. Have you tried magnetic parts mats ala https://www.amazon.com/Magnetic-Project-...B01F58KL96 ?
Craig
'20 R1250RS
Previous: '21 R1250RS, '03 K1200RS, '01 R1100RS, '83 R800
Posts: 15
Threads: 1
Joined: Sep 2023
Reputation:
8
Location: United States
09-17-2023, 10:18 AM
(This post was last modified: 12-09-2024, 08:22 PM by Paughco.
Edit Reason: Update
)
(10-22-2020, 03:20 PM)Lee Wrote: I like to keep the fasteners organized as I remove them.
If I miss a fastener when reinstalling, I know where it goes.
This time when done with the first bike I saw I had 4 fasteners that hold the gas tank assembly to the tank in the container. Good thing it's easy to remove the tupperware
Thank you for that info, Lee. I found out about this forum by watching Grumpy Goat's YouTube video. I remember you from the i-BMW.com days, SGR, and such. I rode a black K1300S with my pal Beech. He's still on his grey K1300S, plus a red one, plus a M-model, etc. I checked EuroMoto Electric, and if I order two air filters plus shipping I'm saving four dollars from just buying it from Seattle BMW Cycle. They have really good free coffee, so think I'll just ride over there to get a new air filter. Bought my '22 RS White last September, only have 8,000 miles on her.
UPDATE: I just got done changing the air filter on my '22 RS. As the Pirate used to say, it was "chimp easy." The old filter looked new until I held it up to the new filter, and there was a difference. No way was I gonna not use the new filter after pulling those panels.
Seeya
ATB
Posts: 2,120
Threads: 60
Joined: Jun 2018
Reputation:
242
Location: Iowa, US
09-18-2023, 07:37 AM
(This post was last modified: 03-06-2024, 11:39 AM by Grumpy Goat.)
(09-17-2023, 10:18 AM)Paughco Wrote: Thank you for that info, Lee. I found out about this forum by watching Grumpy Goat's YouTube video. I remember you from the i-BMW.com days, SGR, and such. I rode a black K1300S with my pal Beech. He's still on his grey K1300S, plus a red one, plus a M-model, etc. I checked EuroMoto Electric, and if I order two air filters plus shipping I'm saving four dollars from just buying it from Seattle BMW Cycle. They have really good free coffee, so think I'll just ride over there to get a new air filter. Bought my '22 RS White last September, only have 8,000 miles on her.
Seeya
ATB
Yep, we met you and Beech at Gunnison 2013 or 2014.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 2,120
Threads: 60
Joined: Jun 2018
Reputation:
242
Location: Iowa, US
03-06-2024, 11:04 AM
(This post was last modified: 03-06-2024, 11:07 AM by Lee.)
(04-27-2022, 02:22 PM)Boxerboy55 Wrote: No matter what the old filter looks like, your not going to leave it in after digging for so long.
Yep. I changed the air filters a couple weeks ago on our RSs a couple weeks ago and changed them even though they looked clean.
When I blew through them with the air compressor I didn't see much dust.
20,900 miles on one and 20,500 miles on the other.
Working with the stainless steel tank center on the R1250RS was better than the plastic tank center on the R1200RS.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 389
Threads: 22
Joined: Jul 2020
Reputation:
47
Location: PA, USA
(10-22-2020, 03:20 PM)Lee Wrote: I like to keep the fasteners organized as I remove them.
If I miss a fastener when reinstalling, I know where it goes.
This time when done with the first bike I saw I had 4 fasteners that hold the gas tank assembly to the tank in the container. Good thing it's easy to remove the tupperware
Lee,
What is the red tool in the bottom left container?
Thanks
I knocked, but the door was open.......
Central PA: 2016 Lupin RS - Keys and no TPMS
Posts: 2,120
Threads: 60
Joined: Jun 2018
Reputation:
242
Location: Iowa, US
08-16-2024, 07:28 AM
(This post was last modified: 08-16-2024, 02:49 PM by Grumpy Goat.)
(08-16-2024, 05:49 AM)36654 Wrote: Lee,
What is the red tool in the bottom left container?
Thanks It's a plastic label scraper.
I use it for delicate prying. Maybe I used it to push on the side panel tab.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 389
Threads: 22
Joined: Jul 2020
Reputation:
47
Location: PA, USA
Yesterday, I replaced the air filter, but didn't find anything that might indicate my sluggish performance. However, somewhere between the left side intake snorkel and the tank fairings, this guy entered the area behind the radiator and forward of the fuel tank to spend their final moments.
On the right side of the engine, I found a large Monarch butterfly which had suffered a similar fate
I knocked, but the door was open.......
Central PA: 2016 Lupin RS - Keys and no TPMS
Posts: 3,031
Threads: 199
Joined: Feb 2014
Reputation:
341
Location: Houston, Texas, USA
How did you not know when that bird entered your bike?
Regards,
Grumpy Goat
2016 BMW R1200RS
2023 Triumph Tiger 900 Rally Pro
Posts: 389
Threads: 22
Joined: Jul 2020
Reputation:
47
Location: PA, USA
(08-22-2024, 02:55 PM)Grumpy Goat Wrote: How did you not know when that bird entered your bike?
Good question.
Makes me wish I had backflushed some air thru the snorkels before closing the airbox and installing the tank fairing panels.
I knocked, but the door was open.......
Central PA: 2016 Lupin RS - Keys and no TPMS
Posts: 2,120
Threads: 60
Joined: Jun 2018
Reputation:
242
Location: Iowa, US
(08-22-2024, 02:55 PM)Grumpy Goat Wrote: How did you not know when that bird entered your bike?
I've had bird strikes I did not hear or feel.
A few times I saw them headed at me or I saw the feathers in my mirrors.
Some times Debbie would tell me I hit a bird.
I remember one time a guy on a K1200GT pulled over because his bike was loosing power. When he walked in front of his bike he found a bird stuffed into the snorkel.
Wish I had saved that picture
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
|