Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Factory sticker removal?
#1
Hello,

I just took delivery of a slightly used, Austin Yellow, 2020 R1250RS.

I have to admit, the yellow wouldn't have been my first choice but I do like it. However, I don't like the black stickers especially the one that says "sport" (seems kind of redundant).

So, has anyone attempted to remove the stickers and is anything needed beyond the usual hair dryer and goo gone? This is also the matte paint which I've never really dealt with before.

As a secondary question, has anyone had experience wrapping a bike? This video has me thinking that BMW really dropped the ball by not offering the RS in red.

https://www.youtube.com/watch?v=O4USLYNT_HY
Reply
#2
(12-14-2020, 08:52 AM)Paul911 Wrote: So, has anyone attempted to remove the stickers and is anything needed beyond the usual hair dryer and goo gone?

Heat and goo gone should do it.
Lee
Iowa, USA
2022 R1250RS White Sport

Past BMWs: 2016 R1200RS x 2,  2011 K1300S x 2,  2003 K1200RS x 2,  1991 K75S x 2,  1987 K75T x 2, 1984 R100RT
Reply
#3
I would heat lightly with a heat gun and carefully peel. If you can get the peel angle right (about 150 degrees) the stickers should leave little or no residue. Goo gone should work for the rest (I wouldn't use Goof Off).

Chris
Reply
#4
(12-14-2020, 08:52 AM)Paul911 Wrote: BMW really dropped the ball by not offering the RS in red.

It looks sharp in red.
I like the red valve cover gasket.
Lee
Iowa, USA
2022 R1250RS White Sport

Past BMWs: 2016 R1200RS x 2,  2011 K1300S x 2,  2003 K1200RS x 2,  1991 K75S x 2,  1987 K75T x 2, 1984 R100RT
Reply
#5
Has anyone removed the large "Triple Black" sticker on the faring of the 2023 black RS?

I really am not fond of that Triple Black sticker on the 2023 RS. The RS on top of the tank looks good but the Triple Black one seems a bit like trying too hard. It looks to be a sticker versus the RS on the tank looks like it's under the clear coat.
Current bike: 2021 S1000RR Black
Reply
#6
The I de-badged both of my R1250RSes by peeling the stickers off, followed with a microfiber and a little 99% isopropyl alcohol for cleanup. BMW's vinyl doesn't look that good to begin with IMO, and I feel stickers advertising what model bike I have (or worse, that hideous "TRIPLE BLACK" badging) are for an age bracket I've long since passed. The iconic marque is enough.
Craig
'20 R1250RS
Previous
: '21 R1250RS, 
'03 K1200RS, '01 R1100RS, '83 R800
Reply
#7
(03-29-2023, 08:58 PM)windyrun Wrote: Has anyone removed the large "Triple Black" sticker on the faring of the 2023 black RS?

I really am not fond of that Triple Black sticker on the 2023 RS.  The RS on top of the tank looks good but the Triple Black one seems a bit like trying too hard. It looks to be a sticker versus the RS on the tank looks like it's under the clear coat.

Here's a Triple Black without the sticker.

Clean Triple Black
Reply
#8
I use Wolfgang Deep Gloss Sealant on my Austin Yellow RS.  It looks amazing and is a great protectant. Any sealant/wax should work fine.  Whatever you do, don't use any sort of polish.

Austin Yellow is awesome, by the way  Smile
Reply
#9
Thanks TriangleRider. I've used other Wolfgang products on my car, but I'll give that a try.

I never did take the stickers off. It took me a bit but I decided you're correct. Austin Yellow is awesome.
Reply
#10
(06-03-2023, 09:08 PM)saread Wrote: Here's a Triple Black without the sticker.

Clean Triple Black

IMHO that looks way better than with the stickers. Coolio.

Seeya
 ATB
Reply
#11
Here's Austin Yellow with the addition of tank protection pads.
       
Happiness comes not from what you have, but from enjoying all that you do have no matter how much or little that may be.
Be stubborn with your dream but flexible with your path
Reply
#12
I looked into wrapping my previous bike by a professional shop and I was quoted close to $1,000. It was a Yamaha Tracer and I was a bit taken aback by the cost. Not really much to wrap but apparently they see it as a difficult job to do..
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)