Posts: 384
Threads: 22
Joined: Jul 2020
Reputation:
47
Location: PA, USA
Hello,
Has anyone replaced the fuel stainer/filter on their RS?
Thanks.
I knocked, but the door was open.......
Central PA: 2016 Lupin RS - Keys and no TPMS
Posts: 2,102
Threads: 60
Joined: Jun 2018
Reputation:
240
Location: Iowa, US
I have not heard of anyone replacing the strainer that's attached to the fuel pump.
It's $108 for the little sock.
The last bike we had with a fuel filter was the 2003 K1200RS.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 2,102
Threads: 60
Joined: Jun 2018
Reputation:
240
Location: Iowa, US
(08-21-2024, 04:06 PM)Boxflyer Wrote: Here's the filter that is between the pump and the pressure bulkhead that seals the tank.
Is it on the back side of the female quick disconnect in this view?
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT
Posts: 9
Threads: 1
Joined: Nov 2023
Reputation:
14
Location: Rhode Island USA
Yes, it's under a U shaped strap...I call it the "bale".
Male end is on the hose from the pump and the threaded end is up against the bulkhead for the outside fittings.
The "sock" strainer just slides on the end of the pump with the steel ring holding it on at the bottom of the tank.
Posts: 2,102
Threads: 60
Joined: Jun 2018
Reputation:
240
Location: Iowa, US
(08-22-2024, 10:39 AM)Boxflyer Wrote: Yes, it's under a U shaped strap...I call it the "bale".
Male end is on the hose from the pump and the threaded end is up against the bulkhead for the outside fittings.
The "sock" strainer just slides on the end of the pump with the steel ring holding it on at the bottom of the tank.
Lee
Iowa, USA
2022 R1250RS White Sport
Past BMWs: 2016 R1200RS x 2, 2011 K1300S x 2, 2003 K1200RS x 2, 1991 K75S x 2, 1987 K75T x 2, 1984 R100RT